AddPac AP-IP300 Installation Guide download pdf (Page 141)

AP-IP300 IP Phone Installation Guide Version 1.0

AddPac Technology Proprietary & Documentation

141

Basic Configuration

Configuring Password

After a connection is established to the console, the user can only have the basic show command. To

gain more privilege to access, the user has to enter enable mode. When the general use enter enable

mode, he/she gains the all the privilege to change the system configuration. Therefore it is important

to set the password, so only the administrator can enter to configure the settings.

[Table 5-3] Password Setup

AP-IP300# configure terminal

AP-IP300(config)#

AP-IP300(config)# enable password {password}

AP-IP300(config)#

Configuring Host Name

When the user is connected to telnet or console, he/she can change a name of prompt in the setting of

CLI. Naming the host becomes more important when many devices are connected to telnet to be

administered. It would be more convenient to use the words representing location as a name.

[Table 5-4] Configuring Host Name

AP-IP300# configure terminal

AP-IP300(config)#

AP-IP300(config)# hostname {name}

AP-IP300(config)#

User Administration

The user account is used for connecting telenet, FTP, Samba.

The user account and password must be know to the administrator only. If they are exposed to any

other, the product can not be operated properly.

[Table 5-5] User Administration

AP-IP300# configure terminal

AP-IP300(config)#

AP-IP300(config)# username {ID} password {password} {administrator | operator |

1 2 ... 136 137 138 139 140 141 142 143 144 145 146 ... 162 163

No comments

AddPac AP-IP300 Installation Guide Page 141