AddPac AP-IP300 Installation Guide download pdf (Page 132)

AP-IP300 IP Phone Installation Guide Version 1.0

AddPac Technology Proprietary & Documentation

132

Chapter 5. Testing Operation

Booting Procedure and Operating Bases

The things that you have to know, prior to turning on the power of AP-IP300, are the booting

procedure.

• AP-IP300 checks its basic operation of its interface, memory and CPU through a self-testing

procedure

• After the Boot Loader is started, the IP100 looks for the appropriate software image file. At the

default configuration, AP-IP300 is set to load the software in the Flash Memory

• If the IP100 fails to find the appropriate software image file, the Boot Loader stands by until the

appropriate file is found to be downloaded from the appropriate system, at the booting mode.

• Once the software is downloaded, the IP-100 is to operate basing on the information of the

configuration which is saved. If there is no information of the configuration, the IP100 is to

operate with the initial setups. The operator needs to set up the related functions for the network

operation

When the power is 110voltage, you have to use the power cable of 110. Since the AddPac AP-

IP300 IPO Phone can recognize which is 110 or 220 voltage automatically, all you need to do is to

use the suitable type of the power cable. There is no need for an additional setups separately.

1 2 ... 127 128 129 130 131 132 133 134 135 136 137 ... 162 163

No comments

AddPac AP-IP300 Installation Guide Page 132